Black Memorabilia Drug Store Pharmacy Medical Apothecary Stonegate Antiques Stonegate Antiques
We ALWAYS offer FREE USPS GROUND ADVANTAGE shipping to the 48 contiguous United States on items priced $100 or greater! Please note: Over-sized/heavy items either require special freight shipping or will incur additional carrier shipping costs and are exempt from free shipping offer.
Sort By:
All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1424083 (stock #G669)
Stonegate Antiques
$95.00
Offered are two desirable hand tools from the mid 19th century.

The first tool is a diminutive hammer which was probably used to drive small nails and tacks. The handle measures 8.5 inches long and sports a shapely head made of iron. This hand wrought primitive tool has a nice original patina and shows wear commensurate with age.

The second tool is called a RACE KNIFE which was a tool of the carpenter, cooper, lumberman and shipwright. The hooked blade scored timbers, staves, or logs with identification marks. This hand tool measures 6 inches long and has 2 cutting blades, one of which closes into the handle like a penknife. The metal component is hand-forged and is affixed to the wooden handle. The condition is very good, with a few ancient hairline splits noted to the handle. The metal has the expected minor pitting and wear of an early tool.

This pair of early tools-of-the-trade would make a great addition to your collection or display!

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1424045 (stock #G661)
Stonegate Antiques
$55.00
Offered is a handsome, C1870s, woodworkers, Adjustable Dado Plane. It is marked "W.COATES 57 BRIDGE STREET - MANCHESTER" and is most likely of English origin.

Dado planes are designed to cut a groove across the wood's grain. The front-mounted nicker iron would score the edge of the groove and thus avoid splitting and lifting the grain. The adjustable depth stop (which is controlled by the brass screw on top) regulates how deep the blade cuts into the wood.

This plane cuts 1/2 inch grooves and sports two functional blades that are in well-maintained, sharp, usable condition. The plane shows various scratches, dings, and minor wear commensurate with a modestly-used antique tool.

Measuring just over 9 inches long and very solid, this tool of the trade is ready for your collection.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1423560 (stock #G660)
Stonegate Antiques
$165.00
Offered in this grouping are ten, 19th century, antique tools, seven of which represent the woodworking trade. Collectively, as displayed in the feature photo, these wonderful vintage pieces make a stunning wall display. For the advanced craftsman, these vintage tools remain completely functional and offer one that opportunity to step back in time and create using historic implements.

1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1424074 (stock #G665)
Stonegate Antiques
$55.00
Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.

An interesting and scarce example of early American craftsmanship.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1423778 (stock #G669)
Stonegate Antiques
$48.00
Offered is a wonderfully hand-crafted, mid-19th century, woodworking, HAND SCRAPER PLANE.

This circa 1860s example has an expertly carved, smooth-angled handle that ends in a flourished, curl-like shape. The overall form of the tool, when viewed in profile, takes on a somewhat futuristic, space-age design- an interesting concept given that this tool is approximately 160 years old! This handsome tool measures 8.25 inches long and sports a warm, aged, brownish patina.

The condition is commensurate with a mildly used antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The blade is sharp and well maintained. A vintage split next to the wedge tightening screw is present on the underside of the scraper.

The hand scraper in woodworking serves as a shaping and finishing tool. It manually removes small amounts of material and can be used instead of sandpaper.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1423966 (stock #G666)
Stonegate Antiques
$45.00
Offered is a wonderfully hand-crafted, circa 1870's TONGUE PLANE.

This early example measures 12.5 inches long and sports a lovely aged brownish patina. The toe of the plane has the owner's initials, "L.C.", boldly-stamped upon it.

The condition is commensurate with a modestly-used antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The base of the handle has a 4 inch split that does not effect the integrity of the tool. A small, 1/4 inch split is noted near the bottom of the heel. The blade is sharp, well-maintained and is imprinted with the word, "WELDON", suggesting a probable Scotland-sourced iron. The plane construction, however, is most likely of English origin due to the bold manner in which the owner's initials are imprinted.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1424026 (stock #G663)
Stonegate Antiques
$95.00
Offered is a wonderful example of mid-19th century craftsmanship. This elegantly designed HAND ADZE exhibits a perfectly formed handle that fits in the palm of one's hand like a glove!

Hand adzes, which are swung with one hand, are used for smoothing or carving wood. This early adze with its captivating, primitive look exhibits appropriate wear commensurate with a modestly used tool of some 160 years of age. Various dings, scratches, wood loss are evident in this piece yet add wonderful character to this early tool of the wood workers trade. Attached to the handle is a hand-forged, 4.5 inch iron blade that is nearly flat. As seen in one of the photos, there exists an older, 19th century wedge, though likely not original, which has served as a more than acceptable replacement over the years.

*****PLEASE NOTE: THE ATTACHED STICKER INDICATES THE YEAR 1985- THE YEAR I PURCHASED THIS TOOL FOR MY OWN COLLECTION.*****

A lovely, early example of a woodworker's tool, designed, as was required during the 19th century, to assist with a specific woodworking function.

All Items : Antiques : Instruments and Implements : Tools : Pre 1900 item #1423759 (stock #G664)
Stonegate Antiques
$50.00
Offered is a wonderfully hand-crafted, 19th century SMOOTHING PLANE.

This lovely example has a subtle, coffin-shape form and sports a dovetailed base that was expertly joined. This handsome tool measures 7.25 inches long and retains its original, aged, brownish patina. The owner's initials, "N.S", are stamped on the heel of this plane.

The condition is commensurate with a mildly-used, antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The blade is sharp, well maintained and has a "BUCK BROTHERS" stamp imprinted upon it. The wedge and blade fit perfectly.

A smoothing plane is typically the last plane used in woodcraft, and when skillfully employed, it offers a finish superior to that of fine sandpaper!

All Items : Antiques : Instruments and Implements : Tools : Woodworking : Pre 1900 item #1424718 (stock #G670)
Stonegate Antiques
$65.00
Offered is C1830's, hand-crafted, Woodworking Adjustable Plow Plane w/Bone Insert. This is a wonderful example of an early, unmarked, one-of-a-kind-constructed, woodworking tool with hand-hewn construction and repairs by a semi-skilled craftsman. Amazingly, this tool is approximately 200 years old!

Evidence of hand-craftmanship are scribe marks that extend beyond their desired point. The metal working skate is crudely riveted to the wood. Various early forged screws and nuts secure the sliding arms. To add to the charm of this early tool are two animal horn repairs to the fence, one of which is quite small and difficult to photograph.

The condition is commensurate with the honorable wear one would expect of an antique, utilitarian woodworking tool. The patina is wonderful with a smooth brownish finish, various scratches and dings, and mild wear. The blade and wedge do not exist.