$39.00
The Cudahy meat packing industry dates back to the turn of the century. The Cudahy meat industry, with stockyards in Omaha, Chicago, Sioux City and Los Angeles produced the REX brand of fine beef and pork products. They also produced lard, soaps and patent medicine products such as Cudahy's Essence of Pepsin and Cudahy's Rexsoma that used the animal byproducts. The patent medicines were marketed as nutritional supplements for improved health.
This 3.5 inch tall undamaged beauty is in very good condition and very classy indeed!
A terrific image on a lovely cup that can be easily displayed anywhere in your collection.
$35.00
The condition is very good with only signs of mild wear commensurate of a modestly used tool of the trade. No damage or loss, just scruffs and a nice surface patina.
Measures about 10.5 inches long and ready for your collection or use. The #7 is stamped into the edge of porcelain.
$165.00
1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.
$335.00
This fabulous early tool of the medical trade sports a visually-interesting, graphic, brass face with a scale delineating increments from 0 to 1400 pounds. There are 2 dials - one that notes the actual pressure achieved, and the second stationary dial that serves as the reference.
This instrument enjoys wonderful, rich patina on both the metal and wooden sections. It measures 13 inches at the widest point and 10 inches at the wooden handles.
A fabulous device which has great visual appeal and displays wonderfully! Sure to spark some interesting conversation at your next gathering!
$38.00
This cleverly-designed image dates to the late 1890s to the early 1900s as it advertises the product as a CURE for all headaches. The passage of the 1906 Pure Food and Drugs Act requiring that foods and drugs bear truthful labeling statements and meet certain standards for purity and strength, prohibited the previously popular and loose use of the word "cure" in product advertising from that point forward.
This delightful song book cover is framed in a 1930s era metal frame measuring 10" x 8". The graphics are quite sharp, and the paper appears aged, consistent with its 100+ years of existence.
$165.00
Additionally, a brass beam, column and dial create a visual enhancement. There are 2 nickel plated pans and a complete set of boxed weights that round off this appealing scale.
The scale case measures 9"L x 4.25"W x 2.5"H and is about 10" tall with the brass column in place.
The overall condition is very good with the expected scuffs, dings and imperfections commensurate of a 120+ year old antique. Minor tarnish prevails especially on the pans and on metal areas. The boxed weight set is in as found very good condition.
***NOTE*** THE SCALE WILL BE SHIPPED DISASSEMBLED for safe keeping during transit.***
A perfect compliment to one's apothecary - drug store collection!
$55.00
The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.
The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.
An interesting and scarce example of early American craftsmanship.
$110.00
This diminutive folder measures 3.5 inches tall x 2.25 inches wide and has a ratcheting type clip on one side designed to adjust height and width to conform to dosage size. The condition is very good and the surface sports a wonderful, rich patina.
An essential piece for the well-curated apothecary collection!
$105.00
The 1st smooth face club is stamped on the back "M.S.J." owner with a faint maker's stamp "N.Y. and a tulip cleek stamp". It is a striking right handed model with original grip, straight hickory shaft, sporting a nice, aged patina. It measures 35.5 inches from heel to top of shaft and has small dings mainly to the leading edge and surface wear commensurate with use and it's 110+ years of age.
The 2nd club is unmarked, and it, too, has signs of mild honorable use and wear and has an original grip. The club has a straight shaft, sports an appealing patina and measures 35 inches from the top of the shaft to the heel. Probably a 3-4 iron.
Two desirable examples of early 1900s clubs!
$15.00
Extensively used in the 19th century and earlier, the cupping glass is a glass vessel from which the air has been exhausted by heat or suction creating a vacuum, and then applied to the skin to draw blood to the surface for therapeutic or curative purposes.
$75.00
The condition of this club is very good with an original leather grip and a straight hickory shaft with a nice original patina. The club measures 41.5 inches long to the heel. The crown of the club is stamped "SPALDING 1".
SOME HISTORY:
"A.G. SPALDING BROS. began its golf club manufacturing in the mid 1890s, first in the USA and then in Britain shortly thereafter. In 1905, they introduced their popular "GOLD MEDAL" model and continued this successful line until 1919. They have been a major innovator / manufacturer in golf and other sports equipment for many years.
$115.00
The ORIENTAL TOOTH PASTE pot lid measures about 3 inches in diameter, sports a marbled exterior and is in very nice condition with a few faint edge chips to the base. There is a slight variance in color between the top and base.
The WOODS CHERRY TOOTH PASTE pot lid measures over 2.5" in diameter, sports red printing on top and is in very good condition. This container has some small chips on the interior edge of the base.
Displayed together as a pair or individually, these dental pot lids will add visual interest and appeal to your collection!
$195.00
Pill machines were designed to enhance the productivity of the early pharmacist, and this design was, indeed, popular for many, many years. This pill machine is designed with 24 tubes for medicine-making.
The condition is very good, sporting a nice patina commensurate with its age and use. It is constructed of walnut and embellished with brass edge guards as well as brass grooved molds. The base measures approximately 11.5" L x 7" W x 1.5" H including the footed base. The paddle is 15.25"L x 2.25"W.
An apothecary classic, ready for your collection!
On Hold
$55.00
The nine inch tall bottle sports the following embossing on the base: "W.N.WALTON PAT'D SEPT. 23D 1862." The fancy, applied recessed label is complete, shows minor age related flaws and is in very good condition.
The bottle has a few unobtrusive manufacturing bubbles and flaws; otherwise no damage. The stopper is missing as seen. The inside of the bottle notes remnants of original contents.
Very nice indeed!
SOME HISTORY:
Cassia sieberiana, a deciduous tree primarily found in Africa, has been used in traditional medicine as purgative, diuretic, analgesic, antibiotic, anti-inflammatory agent.
$75.00
SOLD
$540.00
Each pull measures about 2"W x 1 3/4"H x 1 1/2" front to back (not including bolt).
The condition of the pulls is very good with only a few minor manufacturing imperfections that add to the desired patina of an antique of this age and period.
Most of the pulls sport the following, sometimes illegible, maker's mark on the bottom of the knob: "PAT. FEB 12, 89 - M.D.B. CO. - ST. LOUIS, MO".
The pulls are priced at $540 for the matching set of twelve or can be purchased individually at $45.00 PER PULL. Ready for display in your apothecary collection or for retro-chic decorating use on an actual cabinet, be it antique or contemporary!