Catalog: Antiques (115)

Offered is a hard to find, C1910, quack medicine device that sports its original box and insert.

Like many nostrums of this era, abundant claims were made for the treatment of a wide range of maladies. For instance, the label notes: “special disinfection during prevalence of epidemics and after recovery of patient from smallpox, scarlet fever, diphtheria, etc.”. It is very unlikely that this device did anything to disinfect a room!

Visually-appealing graphics are featured on the cardboard box which measures 5”H x 3 3/8”W. Both the generator and metal stand are in very good, used condition. The dish on top of the device once contained solidified formaldehyde for the sick room.

An interesting and unique item for your pharmacy collection!

This hard to find tool-of-the trade pharmacy instrument is marked “S & D CAPSULE FILLER”. It was used by early 20th century druggists to increase their capsule production. Known as the "CHEMI PHARM UNIVERSAL CAPSULE FILLER" and made by the Fenton Chemical and Pharmaceutical Co. Dating to 1905, this RARELY found example contains 2 separate fillers.

Included are two different capsule size steel fillers, one of which is presently attached by a universal pin. There are 3 filling trays, tamper, a spatula and roller.

The condition of this wonderful apothecary tool is as good as it gets, complete with the warm, rich patina one would expect of an antique of this age: minor scratches, marks and unobtrusive dings and tarnish.

The metal parts appear to be nickel plated, and the wood base seems to be walnut. The filler measures approximately 13”L x 4.5”W x 4.5” H.

The interior contains sand that was used to add weight and stabilize the box when in use. Weighs 25 pounds.

A must addition for any pharmacy/apothecary or Merck collection!

Offered is a very lovely, antique, 12 tube Pharmacy Apothecary Suppository Mold, circa 1880. This example measures 9.5 inches long x 1.75 inches wide x 1 inch high and weighs more than 4 pounds. I believe it is made of bronze and is plated in a nickel finish.

This very durable mold has 2 wing nuts on the base that hinge downwards to facilitate opening. To close, the nuts swing upwards and are locked by screwing in place.

The only markings noted are the numbers '1' and '2' stamped on the end of each plate.

The condition is as follows: scattered small surface dings and modest dings to the edges as seen in the photos. The surface shows scratches and some loss of plating commensurate with age and an honorably-used pharmacy device. The interior surface is similar to the exterior. Overall this antique mold is in very good condition!

Offered are a scarcely-found group of three pharmacy ointment mill tube fillers that date to the circa 1910 - 1930s era. These tools-of-the-trade were typically found in compounding pharmacies. This particular grouping came from the estate of a pharmacist who first began practicing in the early 1900's.

The first example, as seen on the left, measures 3.5 inches and has a heavy brass base and an aluminum compression rod. There is a removable brass nozzle that screws into the base. This diminutive hand size mill would fill 1 to 2 ounce medication tubes and sports a nice patina. There are no markings seen and just minor superficial wear is evident.

The second mill, as seen on the right, measures 4 inches and has a one piece molded aluminum base and a brass compression rod. Perfect for filling smaller tubes, this example fits comfortably in one's hand. The condition is very good except for a small chip noted at the end of nozzle.

The third and final mill featured in the center of the primary photograph sports 3 legs and two removable brass nozzles. The nickel plating covers what appears to be brass, showing minimal wear only to the top of the feet. This unmarked 6.25 inch high beauty has all-original patina and has capacity enough to have filled either multiple or larger-sized medicine tubes.

Also included are four medicine recipe cards from the 1950's noting proprietary medicines from "BUTLERS" drug store establishment.

Measuring 15.5" long x 8.25" high x 1.75" deep, this circa 1890s, wonderful and quite fancy, hand-cut iron utensil or clothing rack sports 5 hooks for hanging. It features an unusual stylized heart or perhaps even a stylized floral design which adds to its visual appeal. Condition is very good with excellent, warm patina. Faint pitting and minimal traces of rust. A hanging-hole on each end is present for easy mounting. A visually-attractive antique iron piece with utilitarian purpose!

Measuring 20" long x 6" high x 3" deep, this circa 1850, wonderful and quite fancy, completely hand-forged iron utensil or clothing rack sports 5 hooks for hanging. It features the ornate and unusual double ram's ear design which adds to its visual appeal - a true work of 19th century blacksmith art with utilitarian purpose.

Condition is very good with excellent patina- the natural pitting and hammer marks commensurate with a hand-forged piece. No rusting. A hanging-hole on each end is present for easy mounting.

Truly a richly beautiful early piece!

Offered is a very difficult-to-find and highly decorative group of six, matching, 19th century, iron, apothecary cabinet drawer pulls featuring stunning labels under glass!

Each wonderfully appealing drawer pull exemplifies the high style era of Victoriana design predominating the second half of the 1800's. Each pull measures about 4.7/8"W x 2 3/8"H x 7/8"D. The labels are reverse painted on glass, all-original and sport a lovely patina.

The condition of the pulls is very good with the exception of only one pull, VIBURN..., showing minor glass damage (see photo). Otherwise, some pulls have very minor paint loss, very faint superficial rust, and may need a slight cleaning of the glass, qualities which are consistent with 140+ year old antiques of the period that experienced consistent use.

Make no mistake, this matching set of stunningly-designed, label-under-glass style apothecary cabinet drawer pulls are a rare find in today's antiques market!

Offered is a very rare, highly ornate and meticulously detailed, 1887, medicine advertising mirror made for the G.G. Green Pharmaceutical Manufacturer of Woodbury, New Jersey. It features 3 PATENT MEDICINES, patent-owned and offered by Surgeon, Colonel G.G. Green. (brief Bio below)

This gorgeous advertising mirror was gifted to select pharmacists who were required to sign a contract promising to consistently offer the particular Green's medicines that were imprinted on the mirror's frame: Green's August Flower, Ague Conqueror, and Boschee's German Syrup.

The frame measures 21" square with an elaborately embellished decorative face of embossed detailing and is constructed of a plaster-based material. The name "G.G. Green, Woodbury, NJ" is prominently embossed on the bottom portion of the frame.

The frame's construction remains quite sturdy. The overall condition is good with some restoration required, if so desired, to the missing pieces as seen in the photos. The missing pieces cause minimal distraction from the beauty, intricacy and rarity of this frame. The mirror had been replaced at some point prior to our ownership.

A brief biography: Colonel George Gill Green served as a Union surgeon during the Civil War and later became a manufacturer of patent medicines. He reached millionaire status after buying the rights to Ague Conqueror, Boschee's German Syrup and Green's August Flower and then, successfully marketing their use. A local philanthropist, he provided the funding for the construction of Woodbury's Opera House. He also built the G.G. Green Manufacturing building, and both structures are now listed on the National Register of Historic Places.

Offered is a wonderful grouping of five, choice C1900-1920, Patent Medicine Drugstore Pill Vials.

The first two medicines are from Denver, Colorado, are labeled KIDNEY TABLETS, and measure about three inches tall. As noted on their brightly colored labels, they are a remedy for a variety of disorders including: URINARY, LIVER, DIABETES, and LUMBAGO to name a few! The tablets are housed within wooden vials which are covered by the labels. The labels shows mild loss primarily on the ends. The condition of the wooden vials is very good. A hard to find Western medicine!

Thirdly, is another nice Western medicine: SWAIN'S BACKACHE AND KIDNEY PILLS from Kansas City, MO. This three inch remedy mentions the Food and Drug Act and sports a wooden vial housed in a very decorative paper label. The condition is very good with loss of the label on both ends.

The fourth medicine, DEBELL'S KIDNEY PILLS, dates to the early 1900s and also mentions the 1906 Pure Foods and Drug Act. It sports a wood vial enclosed in a paper label. This medicine is specific for kidney and bladder complaints and is from the C.W.BEGGS SONS & Co., Chicago, USA. The condition is good with modest wear and loss to one end of the label.

Finally, is DOAN'S REGULETS touted "A MODERN LAXATIVE" from Foster-Milburn CO., Buffalo, N.Y. The label on this 2.5 inch cutie is complete, mildly worn and colorful. Dates to the 1920s era.

Overall a nice group of early medicines ready for your collection!

Offered is an unusual group of 2 Patent Medicines all of which were indicated for issues related to brain function or emotional conditions.

First, is a sample bottle of FLORAPLEXIN prepared by Franklin Hart of New York. The label notes that it is, "A positive cure for Dyspepsia, Liver complaints, NERVOUS EXHAUSTION, & Consumption." Lots of small print on the back noting that if this medicine is used, "you will be cured" of your particular symptoms which include being NERVOUS, IRRITABLE & GLOOMY or having EVIL FOREBODINGS - rather interesting claims not often made by patent medicine producers. Measures about 3 inches, in very good condition.

Second, is a diminutive, corked, 2.75 inch bottle labeled "THE ENSIGN REMEDIES, "Remedy No. 1." The label notes: "For Abnormal Mental States, Fears, Forebodings, Persistent Thoughts and Evil Suggestions". It is quite rare to find medicines that were specifically indicated for the treatment of mental illness. The Ensign Remedies company was from Battle Creek, Michigan, and was mentioned often in the various medical journals published during the late 1800s and early 1900s. The bottle is excellent and the label shows modest wear, loss and fading.

Third, is Dr. Schoop's is sold.

These nostrums give credence to "good things come in small packages". A desirable duo indeed!

Offered is C1830's, hand-crafted, Woodworking Adjustable Plow Plane w/Bone Insert. This is a wonderful example of an early, unmarked, one-of-a-kind-constructed, woodworking tool with hand-hewn construction and repairs by a semi-skilled craftsman. Amazingly, this tool is approximately 200 years old!

Evidence of hand-craftmanship are scribe marks that extend beyond their desired point. The metal working skate is crudely riveted to the wood. Various early forged screws and nuts secure the sliding arms. To add to the charm of this early tool are two animal horn repairs to the fence, one of which is quite small and difficult to photograph.

The condition is commensurate with the honorable wear one would expect of an antique, utilitarian woodworking tool. The patina is wonderful with a smooth brownish finish, various scratches and dings, and mild wear. The blade and wedge do not exist.

Offered are two desirable hand tools from the mid 19th century.

The first tool is a diminutive hammer which was probably used to drive small nails and tacks. The handle measures 8.5 inches long and sports a shapely head made of iron. This hand wrought primitive tool has a nice original patina and shows wear commensurate with age.

The second tool is called a RACE KNIFE which was a tool of the carpenter, cooper, lumberman and shipwright. The hooked blade scored timbers, staves, or logs with identification marks. This hand tool measures 6 inches long and has 2 cutting blades, one of which closes into the handle like a penknife. The metal component is hand-forged and is affixed to the wooden handle. The condition is very good, with a few ancient hairline splits noted to the handle. The metal has the expected minor pitting and wear of an early tool.

This pair of early tools-of-the-trade would make a great addition to your collection or display!

Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.

An interesting and scarce example of early American craftsmanship.

Offered is a handsome, C1870s, woodworkers, Adjustable Dado Plane. It is marked "W.COATES 57 BRIDGE STREET - MANCHESTER" and is most likely of English origin.

Dado planes are designed to cut a groove across the wood's grain. The front-mounted nicker iron would score the edge of the groove and thus avoid splitting and lifting the grain. The adjustable depth stop (which is controlled by the brass screw on top) regulates how deep the blade cuts into the wood.

This plane cuts 1/2 inch grooves and sports two functional blades that are in well-maintained, sharp, usable condition. The plane shows various scratches, dings, and minor wear commensurate with a modestly-used antique tool.

Measuring just over 9 inches long and very solid, this tool of the trade is ready for your collection.

Offered is a wonderful example of mid-19th century craftsmanship. This elegantly designed HAND ADZE exhibits a perfectly formed handle that fits in the palm of one's hand like a glove!

Hand adzes, which are swung with one hand, are used for smoothing or carving wood. This early adze with its captivating, primitive look exhibits appropriate wear commensurate with a modestly used tool of some 160 years of age. Various dings, scratches, wood loss are evident in this piece yet add wonderful character to this early tool of the wood workers trade. Attached to the handle is a hand-forged, 4.5 inch iron blade that is nearly flat. As seen in one of the photos, there exists an older, 19th century wedge, though likely not original, which has served as a more than acceptable replacement over the years.

*****PLEASE NOTE: THE ATTACHED STICKER INDICATES THE YEAR 1985- THE YEAR I PURCHASED THIS TOOL FOR MY OWN COLLECTION.*****

A lovely, early example of a woodworker's tool, designed, as was required during the 19th century, to assist with a specific woodworking function.

Offered is a wonderfully hand-crafted, circa 1870's TONGUE PLANE.

This early example measures 12.5 inches long and sports a lovely aged brownish patina. The toe of the plane has the owner's initials, "L.C.", boldly-stamped upon it.

The condition is commensurate with a modestly-used antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The base of the handle has a 4 inch split that does not effect the integrity of the tool. A small, 1/4 inch split is noted near the bottom of the heel. The blade is sharp, well-maintained and is imprinted with the word, "WELDON", suggesting a probable Scotland-sourced iron. The plane construction, however, is most likely of English origin due to the bold manner in which the owner's initials are imprinted.

Offered is a wonderfully hand-crafted, mid-19th century, woodworking, HAND SCRAPER PLANE.

This circa 1860s example has an expertly carved, smooth-angled handle that ends in a flourished, curl-like shape. The overall form of the tool, when viewed in profile, takes on a somewhat futuristic, space-age design- an interesting concept given that this tool is approximately 160 years old! This handsome tool measures 8.25 inches long and sports a warm, aged, brownish patina.

The condition is commensurate with a mildly used antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The blade is sharp and well maintained. A vintage split next to the wedge tightening screw is present on the underside of the scraper.

The hand scraper in woodworking serves as a shaping and finishing tool. It manually removes small amounts of material and can be used instead of sandpaper.

Offered is a wonderfully hand-crafted, 19th century SMOOTHING PLANE.

This lovely example has a subtle, coffin-shape form and sports a dovetailed base that was expertly joined. This handsome tool measures 7.25 inches long and retains its original, aged, brownish patina. The owner's initials, "N.S", are stamped on the heel of this plane.

The condition is commensurate with a mildly-used, antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The blade is sharp, well maintained and has a "BUCK BROTHERS" stamp imprinted upon it. The wedge and blade fit perfectly.

A smoothing plane is typically the last plane used in woodcraft, and when skillfully employed, it offers a finish superior to that of fine sandpaper!