Catalog: Antiques (115)

Offered is an extremely scarce, C1860s, United Kingdom Maker, Long Nose, Long Spoon, Wood Golf Club with original finish! It measures a formidable 44 inches from the heel to the end of the shaft! What is most intriguing about this club is the modestly angled 6 inch club face which showcases the dramatic curve.

This club actually presents a number of qualities that indicate it may, in fact, be an example of pre-1860s craftsmanship: : LENGTH of the face is 6 inches. The DEPTH of the face is 1 1/8 inches max. The face is SMOOTH and CURVED, and the club head is shaped in the form of a TEARDROP. The club is UNMARKED. The neck is slightly thin at just over 3/4 inches--- all indicators of an early, pre-1860s club!

This amazing club sports most of its original varnish surface and is offered in "as found" condition. The darkening of the finish results in a wonderfully rich patina. The club displays an enchanting presence owing to the gently-sculpted angling of the face. The sole of the club is without the usual ram's horn which was the typical norm, making this particular club that much more intriguing and quite unusual!!! I have not been able to find reference to clubs that were made in this fashion. RARE!!!

The early golfer must have been quite robust and sturdy as this heavy club face is one that most folks today would have a difficult time keeping "square" at impact. Long spoon clubs were used off of grassy surfaces which accounts for the very nice condition of this beauty. Besides the unobtrusive, expected scuff marks on the sole, there is only one tiny, barely-noticeable chip on the leading edge of the club face at the sole, consistent with hitting something other than a grassy surface!

The lead on the back of the club has been partially removed to customize it for the golfer. The slightly warped hickory shaft is undamaged and sports a warm, honey-colored surface. The leather grip was expertly replaced many, many years ago and has signs of honorable wear.

The skills of the craftsman are most apparent when the club is viewed from the top. While unmarked, this club displays the form of the exceptional, highly-skilled, UK club makers of the 19th century. According to author and golf history expert, Jeffrey B. Ellis, unsigned, long-nosed golf clubs were the norm in the pre-1870 era.

This rare, antique, hand-wrought, golf club was recently acquired from the estate of a gentleman who had restored and collected golf clubs for 7 decades! His family, while settling his estate, remarked that he had "paid crazy prices for some of his collection!". This prized, rare club is certain to have been included in that category!

A phenomenal, rarely-found example of 19th century craftsmanship, and a tangible example of exemplary golfing history.

Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.

An interesting and scarce example of early American craftsmanship.

Offered for consideration, is a wonderful and rarely found, early 20th century, English, "DENTIST" sign in brass measuring 12 3/4ths inches wide x 7 inches high.

The sign advertises the office of "James H. Groom. Dentist.", and remains in fine condition with rich, deep-toned, original patina and some very minor warping due to its many years of age. The lettering is actually impressed into the surface and is painted black. Any white marks appearing on the front of the sign are due only to light/sun reflection---the sign has a very even-toned coloration.

The sign has a hole at each corner to facilitate hanging, or it may be easily displayed upon a shelf!

A fabulous, scarce, rich-looking display piece with great "eye appeal"!

*****SOME HISTORY*****

We were contacted by the granddaughter recently with this insightful information.

I thought you might be interested to know that I have a photograph in my family photo archive that shows this very sign in situ. The photo has my great grandfather in the doorway of a chemist shop called Nicholls in Camborne, Cornwall. On the door post I can just make out this brass plaque (using a magnifying glass and good light - takes quite a bit of concentration). Anyway, I thought it would help if you knew where it came from. On the 1911 UK Census, there is a James Henry Groom age 28, living as a Boarder at the house of Jane Bray, 19 Basset Street, Camborne. His occupation is described as 'Dentistry' and it says he was born in Wisbech, Cambridgeshire. The photo I have is probably taken after 1911 but probably before 1920. Interesting for whoever might buy it to know its history.

Measuring just 2.75 inches high, this lovely Copper Lustre Creamer or mini Jug, is in impeccable condition-- no chips, breaks, hairlines, etc! Delicate floral and leaf patterning in copper is set against a pretty bright blue band. Nicely swirled applied handle! A very sweet addition to one's copper lustre collection!

Measuring just 3 inches in length, this unusual 19th century heart cookie cutter is in fine, all-original condition! From the renown, Pennsylvania Robacker Estate, published experts in Pennsylvania Dutch decorative art and culture, who passed away in the 1980's.

No breaks or other damage. A tiny spot of very superficial rust here and there that may be removed, if so desired, by polishing with a clear paste wax.

A sweet accent piece for the country kitchen!

Measuring 20" long x 6" high x 3" deep, this circa 1850, wonderful and quite fancy, completely hand-forged iron utensil or clothing rack sports 5 hooks for hanging. It features the ornate and unusual double ram's ear design which adds to its visual appeal - a true work of 19th century blacksmith art with utilitarian purpose.

Condition is very good with excellent patina- the natural pitting and hammer marks commensurate with a hand-forged piece. No rusting. A hanging-hole on each end is present for easy mounting.

Truly a richly beautiful early piece!

Offered for sale is a wonderful late 19th century, Victorian drugstore, medical advertising cup. This lovely porcelain mug has “CUDAHY’S REXOMA” printed on the lip. Beautifully hand painted pink roses and other lavender colored flowers adorn the cup on all surfaces.

The Cudahy meat packing industry dates back to the turn of the century. The Cudahy meat industry, with stockyards in Omaha, Chicago, Sioux City and Los Angeles produced the REX brand of fine beef and pork products. They also produced lard, soaps and patent medicine products such as Cudahy's Essence of Pepsin and Cudahy's Rexsoma that used the animal byproducts. The patent medicines were marketed as nutritional supplements for improved health.

This 3.5 inch tall undamaged beauty is in very good condition and very classy indeed!

A terrific image on a lovely cup that can be easily displayed anywhere in your collection.

Professionally framed in an intricate, antique-look, gold gilt molding with museum quality, acid-free mat and mounting materials, this 1840, hand-colored map of Germany, Switzerland, and Northern Italy will be well-preserved for many, many years to come!

Photography was a challenge in an attempt to avoid flash reflections. As such, please note that the rich coloring- violet, yellow, green and gray- is even throughout the map.

All print and map detailing is clean and easily read. Some minimal foxing and age staining to map do not detract from the visual appeal of this piece. Framed map measures 12 3/4" wide x 15 1/2" long.

Offered is a very lovely, antique, 12 tube Pharmacy Apothecary Suppository Mold, circa 1880. This example measures 9.5 inches long x 1.75 inches wide x 1 inch high and weighs more than 4 pounds. I believe it is made of bronze and is plated in a nickel finish.

This very durable mold has 2 wing nuts on the base that hinge downwards to facilitate opening. To close, the nuts swing upwards and are locked by screwing in place.

The only markings noted are the numbers '1' and '2' stamped on the end of each plate.

The condition is as follows: scattered small surface dings and modest dings to the edges as seen in the photos. The surface shows scratches and some loss of plating commensurate with age and an honorably-used pharmacy device. The interior surface is similar to the exterior. Overall this antique mold is in very good condition!

Pictured is an absolutely fabulous and wonderful Victorian Child's Rocking Chair sporting a fancy crest with an incised design in what appears to beautiful burled walnut. This diminutive gem with beautiful detailing is further embellished with caning woven to its back and seat.

Overall, this heirloom piece flaunts its desirable size with a nice early finish, lovingly curved armrests, perfect-condition caned seat and back, and decoratively turned spindles and front legs.

Given its age, the rocker remains very sturdy and ready for the child in your family to enjoy! It has the expected, minimal surface blemishes and unobtrusive dings and wear that are commensurate with a piece of child's furniture from the 1880 era. Additionally, there are two very, very tight hairline splits in the left side of the seat frame, that again, do not effect the chair's structural integrity. The first is noted just in front of the base of the left arm (when sitting) and the second is seen where the back of the seat joins with the vertical rail. Both imperfections have been photographed, are solid, and do not impact the rocker's structural integrity. The chair measures just over 27 inches tall and the seat width at the front of the chair measures 15.5 inches wide. The rockers measure 24 inches in length.

Just a lovely and special heirloom piece for the new baby or toddler in your family!

Please note that because this item would be classified as oversize by delivery carriers, this item does not qualify for free shipping.

Measuring just 4.5 inches in length, this tiny 19th century grain or flour scoop from the esteemed Pennsylvania Robacker Estate is in fine, all-original condition! No breaks or other damage. A tiny spot of very superficial rust here and there that may be removed, if so desired, by polishing with a clear paste wax. A sweet accent piece for the country kitchen!

The Robackers were a Pennsylvania husband and wife team who became the published, indisputable American experts in Pennsylvania Dutch and Early American decorative art and culture. Over their multiple decades of marriage, they collected an utterly massive number and wide variety of such artifacts before both passing away in the early 1980's.

Offered is this very scarce and quite early, circa 1890s, James and David Kinnell, Smooth Face Hickory Shaft Golf Club made in Scotland. Although smooth face golf clubs fell out of fashion by the very early 1900s, they were still offered in catalogues for a number of years beyond this date.

This smooth face club is stamped on the back "PRESTWICK KK CLUBS". The leather grip is in good condition, and the straight hickory shaft sports a nice aged patina.

Measures 35 inches from heel to top of shaft and is probably a MASHIE although it is not marked as such. There are various small leading edge dings and examples of wear commensurate with this club's 130+ years of age and use.

SOME HISTORY

The Kinnell brothers both served as golf professional and clubmaker at St Nicholas Golf Club . James was their pro from 1897 until 1901 and his brother David served between 1902 and 1936.

Made, warranted and patented in 1863 by Charles Emerson of Charlestown (a suburb of Boston), Massachusetts, this all original razor strap miraculously retains its original cardboard sheath.

The historically-fascinating sheath label is in exquisite condition with minor edge wear noted to the sheath. The strap shows evidence of use and also remains in fine condition.

The 9.35 inch long strap was advertised for use in sharpening not only shaving razors, but also pen knives and surgical instruments!

A rare piece of early Barber Shop Memorabilia!

Offered is a very scarce, 19th century, strength measuring medical device known as a dynamometer that was manufactured by the G. Tiemann Company, New York, the most renown and respected surgical device manufacturers of the 19th century. Sold in the US by a gymnasium apparatus company out of St. Louis, the Fred Medart Company, the device was designed to assess the strength of the chest, back and legs up to a pull capacity of 1400 lbs.

This fabulous early tool of the medical trade sports a visually-interesting, graphic, brass face with a scale delineating increments from 0 to 1400 pounds. There are 2 dials - one that notes the actual pressure achieved, and the second stationary dial that serves as the reference.

This instrument enjoys wonderful, rich patina on both the metal and wooden sections. It measures 13 inches at the widest point and 10 inches at the wooden handles.

A fabulous device which has great visual appeal and displays wonderfully! Sure to spark some interesting conversation at your next gathering!

Offered is a wonderfully hand-crafted, 19th century SMOOTHING PLANE.

This lovely example has a subtle, coffin-shape form and sports a dovetailed base that was expertly joined. This handsome tool measures 7.25 inches long and retains its original, aged, brownish patina. The owner's initials, "N.S", are stamped on the heel of this plane.

The condition is commensurate with a mildly-used, antique hand tool. There are the expected unobtrusive small dings, scratches and imperfections typically seen in vintage tools. The blade is sharp, well maintained and has a "BUCK BROTHERS" stamp imprinted upon it. The wedge and blade fit perfectly.

A smoothing plane is typically the last plane used in woodcraft, and when skillfully employed, it offers a finish superior to that of fine sandpaper!

Offered are two desirable hand tools from the mid 19th century.

The first tool is a diminutive hammer which was probably used to drive small nails and tacks. The handle measures 8.5 inches long and sports a shapely head made of iron. This hand wrought primitive tool has a nice original patina and shows wear commensurate with age.

The second tool is called a RACE KNIFE which was a tool of the carpenter, cooper, lumberman and shipwright. The hooked blade scored timbers, staves, or logs with identification marks. This hand tool measures 6 inches long and has 2 cutting blades, one of which closes into the handle like a penknife. The metal component is hand-forged and is affixed to the wooden handle. The condition is very good, with a few ancient hairline splits noted to the handle. The metal has the expected minor pitting and wear of an early tool.

This pair of early tools-of-the-trade would make a great addition to your collection or display!

Offered is a wonderful example of a late 19thC Pharmacy "tool of the trade" known as a pill machine but often referred to as a pill roller.

Pill machines were designed to enhance the productivity of the early pharmacist, and this design was, indeed, popular for many, many years. This pill machine is designed with 24 tubes for medicine-making.

The condition is very good, sporting a nice patina commensurate with its age and use. It is constructed of walnut and embellished with brass edge guards as well as brass grooved molds. The base measures approximately 11.5" L x 7" W x 1.5" H including the footed base. The paddle is 15.25"L x 2.25"W.

An apothecary classic, ready for your collection!

Offered is a group of six, very scarce, 19th century, tin, apothecary, storage containers with hand-painted, gold gilt labels and a decorative and stylized floral, front embellishment. The gold gilt labels make these early pharmacy canisters really stand out!

The tins sport an early and original, hand-painted, mustard-colored surface patina. The five smaller containers measure approximately 7 inches high x 4 inches wide x 5 inches deep (front to back including the distinctive front floral embellishment). The one large container measures about 8 inches high x 5 inches wide x 5 inches deep.

Structurally, the canisters are very solidly crafted containers, each with a slanted, well-fitting, hinged cover that snaps into place when closed. There are unobtrusive dings, and the finish shows modest wear and paint loss commensurate with a 19th century, well-loved and well-used, dispensary antique.