$35.00
Offered is an absolutely fabulous group of early 1900, Merck & Co., amber glass, dispensing pharmacy bottles. Each bottle measures 5.5 inches tall, sports a ground glass stopper and comes with 2 labels. Many of the bottles have contents and are in undamaged condition. Only the "Pepsin" bottle has condition issues - (a big chip at the back side of the mouth not seen from the front when displayed - $15.00).
Don't miss this rare opportunity to acquire a quality pharmacy collection! Select one or more bottle - your choice $35.00 each!
SOLD
SOLD
The tins sport an early and original, hand-painted, mustard-colored surface patina. The five smaller containers measure approximately 7 inches high x 4 inches wide x 5 inches deep (front to back including the distinctive front floral embellishment). The one large container measures about 8 inches high x 5 inches wide x 5 inches deep.
Structurally, the canisters are very solidly crafted containers, each with a slanted, well-fitting, hinged cover that snaps into place when closed. There are unobtrusive dings, and the finish shows modest wear and paint loss commensurate with a 19th century, well-loved and well-used, dispensary antique.
$295.00
Each wonderfully appealing drawer pull exemplifies the high style era of Victoriana design predominating the second half of the 1800's. Each pull measures about 4.7/8"W x 2 3/8"H x 7/8"D. The labels are reverse painted on glass, all-original and sport a lovely patina.
The condition of the pulls is very good with the exception of only one pull, VIBURN..., showing minor glass damage (see photo). Otherwise, some pulls have very minor paint loss, very faint superficial rust, and may need a slight cleaning of the glass, qualities which are consistent with 140+ year old antiques of the period that experienced consistent use.
Make no mistake, this matching set of stunningly-designed, label-under-glass style apothecary cabinet drawer pulls are a rare find in today's antiques market!
$65.00
The first two medicines are from Denver, Colorado, are labeled KIDNEY TABLETS, and measure about three inches tall. As noted on their brightly colored labels, they are a remedy for a variety of disorders including: URINARY, LIVER, DIABETES, and LUMBAGO to name a few! The tablets are housed within wooden vials which are covered by the labels. The labels shows mild loss primarily on the ends. The condition of the wooden vials is very good. A hard to find Western medicine!
Thirdly, is another nice Western medicine: SWAIN'S BACKACHE AND KIDNEY PILLS from Kansas City, MO. This three inch remedy mentions the Food and Drug Act and sports a wooden vial housed in a very decorative paper label. The condition is very good with loss of the label on both ends.
The fourth medicine, DEBELL'S KIDNEY PILLS, dates to the early 1900s and also mentions the 1906 Pure Foods and Drug Act. It sports a wood vial enclosed in a paper label. This medicine is specific for kidney and bladder complaints and is from the C.W.BEGGS SONS & Co., Chicago, USA. The condition is good with modest wear and loss to one end of the label.
Finally, is DOAN'S REGULETS touted "A MODERN LAXATIVE" from Foster-Milburn CO., Buffalo, N.Y. The label on this 2.5 inch cutie is complete, mildly worn and colorful. Dates to the 1920s era.
Overall a nice group of early medicines ready for your collection!
$75.00
$60.00
The first club is stamped on the back with the following: "Hillerich & Bradsby Co. - Louisville, KY - GRAND SLAM" with the "hand and cards" cleek mark". The "#7" is stamped on the sole. The face is DOT stamped with a fancy "GRAND SLAM" mark on the sweet spot. The straight shaft measures 35.5 inches to the heel and sports a replaced leather grip.
The second club is stamped on the back with the following: "LADY BURKE" in an oval - the "#11", the "SCALES" cleek mark and "NIBLICK". The straight shaft is 35 inches long to the heel and sports a nice patina and original grip with a small piece missing. The face has a straight line configuration.
The third club, which has "MASHIE" stamped on the sole, measures 36.5 inches and has an original leather grip and a shaft with a slight bend. The back has the following stamps: "Approved by GOLFERS ASSN. of AMERICA" and "CRAIG WOOD - LOUISVILLE G.C. - MASHIE and P-52".
SOME HISTORY:
The Burke Company was the offshoot of another Ohio golf manufacturer. Its founder, William Burke, had managed MacGregor's club-making for nearly 15 years before branching out on his own in 1910 and converting his new company into Burke Golf Company, beginning with a full production of complete golf clubs.
Truly one of the world’s best golfers during his era, Craig Wood, was the winner of 21 PGA Tournaments including both the Masters and U.S. Open in 1941. He spent many of his most competitive seasons as a head professional in New Jersey and was a member of three Ryder Cup teams (1931, 1933, 1935).
He worked at Forest Hill Field Club in Bloomfield from 1928-31 and at Hollywood Golf Club in Deal from 1932-35.
Craig Wood was the first player to lose all four major championships in extra holes. His major wins came late in his career at age 39.
$110.00
The first club is stamped on the back "SPALDING - GOLD MEDAL" and measures 39.5" from the heel to the top of the shaft. The Gold Medal line was first introduced in 1905 and offered till 1919. The complete grip shows mild separation and is in good condition. The shaft on this long club (likely a #2 iron) has a modest bend near the grip.
The second club, a putter, is stamped on the upper shaft "THE CRAWFORD MACGREGOR & CAMBY CO - DAYTON, OH" and measures 32.5 inches from the top of the club to the heel. The sheepskin grip is worn and the face of the club is heavy by design.
The third club is likely a MASHIE, has a straight shaft and good grip. The name of the maker is not discernible due to a partially worn stamped label. It measures almost 36 inches from the end of the club to the heel.
All three clubs show various, small, leading edge dings, original patina and mild wear commensurate with the clubs' use and 110+ years of age. A delightful trio!
$175.00
The first club, a ladies' MASHIE iron, is stamped with the following: "HENDRY & BISHOP Ltd. - EDINBURGH - Made in Scotland - Warrented Hand Forged - SPECIAL (L) with the MITRE BRAND" cleek mark. This circa 1930 club has a handsome construction and measures 35 inches to the heel. The straight hickory shaft sports a nice patina, and its original leather grip is in good condition. The club head is in good condition with mild leading edge dings and sports dot face stamping.
The second club, a circa 1905 JIGGER, is in very good overall condition sporting a solid, straight hickory shaft with an original patina. The club head sports a random sized dot-punched style on the face. The back is stamped with the following: "HAND FORGED IN SCOTLAND and M.J. BRADY - SPECIAL" in an oval. T.S.St.A plus REGISTERED TRADEMARK and a PIPE" cleek mark. (T.S.St.A stands for TOM STEWART-ST ANDREWS.) A JIGGER is a short-shafted club with low loft which was used in the same way as the modern chipper. The club has minimal dings and wear to the head. A high quality, low profile specialty club! A very nice example indeed!
The third club is a fine example of a circa 1900 crafted, low profile and low lofted driving iron or mashie. The leather grip has been professionally replaced, and the straight hickory shaft sports an original patina. The club measures 37 inches to the heel. There is deep nicking to the hosel and a slight wiggle where the shaft joins. The face has a ding by the toe end, perhaps the result of an honorable blow that caught both ball and stone many years ago. The back is stamped with the following: "SCCMCoy LTD - ED......." (? Edinburgh).
A nice trio of Scottish clubs!
$80.00
The first club, dating to 1925, has "TED RAY SEVENTY-TWO" "LADIES - SPECIAL - HAND FORGED and PUTTER" stamped on the back of the face. This WILSON-made club measures 33" from the heel to the top of the shaft and appears minimally used. The sturdy hickory shaft has a mild bend from front to back on the lower shaft. The leather grip is in good condition.
The second club, a mid iron, circa 1920-1930, is stamped on the on the back of club "KRO-FORGED PROFESSIONAL" and measures 37.5 inches from the top of the shaft to the heel. This KROYDON made club sports a sturdy straight shaft and a good original grip. There is faint superficial pitting to the club head.
Both clubs enjoy original patina and have mild wear commensurate with the clubs' use and their nearly 100 years of age. A delightful duo, ready for play or display!
SOME HISTORY:
https://www.si.com/golf/news/ted-ray-was-golfs-original-long-driver-and-a-true-original
It is worth a visit to this SPORTS ILLUSTRATED link for some great info on this delightful man, MAJOR winner and unheralded pro golfer TED RAY who deserves to be in the GOLF HALL OF FAME!
$70.00
The first club has the following stamped on the back in an oval: "Wright & Ditson SPECIAL", plus "HAMMER FORGED" and the cleek mark image. A worn "MASHIE NIBLICK" stamp is noted on the sole. The face has a dot style stamping, and the shaft has "WRIGHT & DITSON" stamped near the grip. The shaft has an old repair and a bend. Overall, a nice club with mild wear to the metal appropriate for its age.
The second club is a handsome 3 iron Spalding Kro-Flite model sporting a lined face with a fancy circular design in the sweet spot. The #3 is stamped on the sole. The back has the following stamping: "Professional Golf Assoc. - Custom Made KRO-FLITE" and a crow cleek mark. The condition is very good noting a slight bend towards the handle and a wonderful patina.
In 1892, A. G. Spalding & Bros, acquired the Wright & Ditson Company to enhance their position in the club making industry. Wright & Ditson company was founded in 1871, and the name continued to be used by Spalding on both golf clubs & balls into the 1940's.
$135.00
The 1st smooth face club is stamped on the back "R.B.WILSON - OK SPECIAL - MADE IN SCOTLAND". The lambskin grip is in good condition, and the hickory shaft sports a nice aged patina. It measures 38.5 inches from heel to top of shaft and is likely a MASHIE although it is not marked as such. There are various small dings, faint pitting to the metal surface and examples of wear commensurate with this club's use and 110+ years of age.
The 2nd club is marked "MORRISTOWN" on back and is very nice with minimal signs of use. There is a "sheen" seen in the sweet spot that is of unknown origin. Of note: Spalding produced a line of clubs marked 'Morristown', so this club may well be one of their earlier examples as there are no other maker marks present...an excellent club, indeed!
$125.00
The first club is a nice circa 1900 example from the shop of Peter Hendrie. It measures 33.5 inches from the heel to end of shaft and sports a dot pattern on the face. The straight hickory shaft and leather grip are in good condition. The top of the club is stamped "P. HENDRIE" and H.B. "BYERGASON" (club owner). The head of the club has the expected dings, scuffs and wear of an early club.
Club number two is stamped "MACGREGOR 3 1/2" on the top and sports a deep checkered pattern on the face. The solid straight hickory shaft and leather grip are in very good condition on this 30.5 inch club. It sports an original patina and handsome styling- both desirable features of this nice playable club.
SOME HISTORY:
Peter Hendrie was born in North Berwick, Scotland, in 1872, where he caddied as a boy before obtaining his first professional position at the York club in 1897. He returned to North Berwick in 1900 and worked as a clubmaker for a few years. In 1902, he emigrated to Canada with his wife and took up the professional’s post at the Victoria Golf and Country Club in Montréal.
He moved south to the United States in 1911, becoming the professional at the Fort Mitchell Country Club in Kentucky. He assumed various professional positions in the US until 1924 when he was appointed the first professional at the new Ulen Country Club in Lebanon, Indiana, where he remained until his retirement in 1946.
$35.00
This 5 inch tall wide mouth bottle is in fine condition. The ground glass stopper fits perfectly. The glass label is complete, has mild unobtrusive crackled paint and displays quite well. The base has embossing that notes "W.T.CO. USA.".
A darling little size that will fit with any collection.
$195.00
Pill machines were designed to enhance the productivity of the early pharmacist, and this design was, indeed, popular for many, many years. This pill machine is designed with 24 tubes for medicine-making.
The condition is very good, sporting a nice patina commensurate with its age and use. It is constructed of walnut and embellished with brass edge guards as well as brass grooved molds. The base measures approximately 11.5" L x 7" W x 1.5" H including the footed base. The paddle is 15.25"L x 2.25"W.
An apothecary classic, ready for your collection!
$15.00
Extensively used in the 19th century and earlier, the cupping glass is a glass vessel from which the air has been exhausted by heat or suction creating a vacuum, and then applied to the skin to draw blood to the surface for therapeutic or curative purposes.
$45.00
Each pull measures approximately 1.4"W x 1.3"H x 1" front to back (not including bolt). (Please note- "INULA HELEN" is sold.)
The condition of the pulls is very good with only a few minor manufacturing imperfections that add to the desired patina of an antique of this age and period. The decorative gold embellishments painted above and below the medicinal labeling of each pull show moderate loss, primarily "use-wear", due to decades of continual handling over their 140+ years of age. Please note that the "TEREBINT" pull has a rear chip as noted in the individual, close-up photo.
The pulls each sport the following maker's mark on the bottom of the knob: "PAT. FEB 12, 89 - M.D.B. CO. - ST. LOUIS, MO", although on some of the pulls, this marking has been illegibly applied.
Ready for display in your apothecary collection or for retro-chic decorating use on an actual cabinet, be it antique or contemporary!
$165.00
1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.