Catalog: Antiques: Instruments and Implements (101)

Offered is a fabulous pair of antique Apothecary Show Globes which includes one fancy Victorian style hanger. Photos provide close-up views of these intricately detailed, high-end show globes, and the 1891 photo from the WHITALL TATUM COMPANY catalog, establishes the age of these beauties.

The overall condition of the globes is very good with the imperfections and wear expected given their 130+ years of age. The decorative frames are sturdy and the globes hold water with ease. At some point long ago, the metal components were painted a gold/brass color. Today, the paint retains a delightful brass tone with an antiqued patina.

The attention to detailing and design of these show globe frames are second to none, pushing these show globes into a class by themselves. Note the intricacy and the elegance of design incorporated into both the show globe collar and the finial - simply outstanding!

The show globes measure 22 inches tall from the top of the crowns to the tip of finials. The exterior of the hand blown glass globes are in good condition. The interior of the globes note a modest yet common and unobtrusive haze which will not be visible when the globes are filled with the colored water of your choice. Additionally, the haziness should clean up if desired.

A singular, fancy wall bracket that swivels from side to side is included, measuring about 15" long x 9" high .

Acquisition of these rarely found, matching, beautifully stunning show globes is an opportunity not to be missed!

Offered is a lovely, antique, late 19th C, hand-held massaging tool. This skillfully turned hardwood handle and frame features four wood and rubber rollers which facilitate massaging technique. Many modern hand-held massaging tools mimic the design of this antique piece.

Research notes that this early medical instrument was made by the Health Culture Co.

The following patent date is stamped on the interior portion of the wheel (PAT'D APR 12, 02), however, the date of 1892 is also referenced for this particular piece in several sources, so this device appears to have been marketed prior to the granting of a patent for the design.

Measures approximately 5 1/2" x 7 1/2.

Condition is very good! This visually interesting piece retains its original finish which is a warm, honey-colored woodtone with minor stains and wear commensurate with an antique instrument. No damage. It works!!!

Offered are two, very nice, circa 1910, Seymour Dunn, DEEP DOT Face, hickory shaft golf clubs.

These scarce clubs are stamped on the back "MAKER - SEYMOUR DUNN - LAKE PLACID NEW YORK U.S.A. - a CROWN (VIET ARTE)..". The leather grips are in good condition, and the shafts sport a nice aged patina.

The PITCHER measures 35.5 inches from heel to top of shaft. The MIDIRON measures 37.5 inches from the heel to top of club, and there is a slight bend in the shaft. Both clubs have various small dings to the metal surface and areas of wear commensurate with the club's use and 110+ years of age.

Seymour Dunn, of Scottish origin, was the nephew of Willie Dunn, an accomplished golf pro, course designer and club maker. Seymour worked with his uncle for two years until setting up his own shop in 1910. Seymour, just like his uncle, became an accomplished golf pro, course designer and club maker, and additionally, was a successful author of books on golf and a frequent contributor to golf magazines. Quite a talented family!

Offered is a grouping of ten, highly decorative and seldom-found, 19th century, apothecary or pharmacy drawer pulls. These nonmagnetic, metal pulls are adorned with fancy ornamental scroll work and stunning, applied copper labels which identify the specific drawer contents.

These antique, circa 1890s pulls are complete and are quite visually appealing, displaying very well. They show mild wear and imperfections commensurate with their 130+ years of age. For example, some are slightly misshapen or very subtly flattened as seen in photos. Each pull is approximately 4 inches long x 1.75 inches wide. There are no mounting screws.

These lovely and scarce antique pulls remain quite sturdy, ready for another 100+ years of service.

Offered is a delightful trio of 19th century, Horn, Apothecary Pharmacy Powder or Tablet Scoops. These tools of the trade were made in three different sizes ranging from nearly 5 inches long to 5.75 inches long.

These interesting pharmacy implements have a warm honey translucent tone and are complemented by a natural brownish color which is especially noted in the largest scoop. They were most likely made from cow horn as was typical of the period. Depending upon their size, a scoop, such as these, was capable of holding from 2 ounces to about 4 ounces of medicine when used compounding process.

The smooth surface of each scoop shows minor wear from usage. Overall, they have a very handsome and rich patina with various minuscule scuffs and imperfections commensurate with age and use. The only minor damage noted is a 1/4" split near the corner of the handle of the largest scoop.(SEE PHOTO).

This very scarce group of 19th century horn scoops will make a wonderful addition to any apothecary collection!

Offered is a diminutive size, 19th century apothecary bottle labeled "SODA MINT". This bottle sports a hand-painted glass recessed label with gold embellishment! Soda Mint today is better known as sodium bicarbonate or baking soda, which is used in cooking, and medicinally to relieve heartburn, sour stomach, or acid indigestion by neutralizing excess stomach acid.

This 5 inch tall wide mouth bottle is in fine condition. The ground glass stopper fits perfectly. The glass label is complete, has mild unobtrusive crackled paint and displays quite well. The base has embossing that notes "W.T.CO. USA.".

A darling little size that will fit with any collection.

Offered are three, circa 1900-1905 era, Spalding, smooth face, hickory shaft golf clubs. Although smooth face golf clubs fell out of fashion and perhaps function by the very early 1900s, they were still offered in catalogues for a number of years beyond this date.

The first club has "THE SPALDING" stamped on the back of the face as well as on the shaft and dates to pre 1900. It measures 36" from the heel to the top of the shaft and appears minimally used. The sturdy hickory shaft has a mild bend near the face and is probably a MASHIE.

The second club, a mid iron, circa 1910, is stamped on the upper shaft and on the back of club "SPALDING SPECIAL" and measures 39 inches from the top of the club to the heel. The replaced grip is new and the shaft is moderately bent but sturdy.

The third club is also a mid iron and sports a straight shaft and fair grip. It has "A.G.SPALDING & BROS" stamped on the shaft and on the back of the club. It measures just over 38 inches from the end of the club to the heel and dates to C1905.

All three clubs enjoy original patina and have mild wear commensurate with the clubs' use and their 110+ years of age. A delightful trio!

Offered for sale is a wonderful late 19th century, Victorian drugstore, medical advertising cup. This lovely porcelain mug has “CUDAHY’S REXOMA” printed on the lip. Beautifully hand painted pink roses and other lavender colored flowers adorn the cup on all surfaces.

The Cudahy meat packing industry dates back to the turn of the century. The Cudahy meat industry, with stockyards in Omaha, Chicago, Sioux City and Los Angeles produced the REX brand of fine beef and pork products. They also produced lard, soaps and patent medicine products such as Cudahy's Essence of Pepsin and Cudahy's Rexsoma that used the animal byproducts. The patent medicines were marketed as nutritional supplements for improved health.

This 3.5 inch tall undamaged beauty is in very good condition and very classy indeed!

A terrific image on a lovely cup that can be easily displayed anywhere in your collection.

Offered are three nice, collectible, C1920 - 1930 era, hickory shaft golf clubs.

The first club is stamped on the back with the following: "Hillerich & Bradsby Co. - Louisville, KY - GRAND SLAM" with the "hand and cards" cleek mark". The "#7" is stamped on the sole. The face is DOT stamped with a fancy "GRAND SLAM" mark on the sweet spot. The straight shaft measures 35.5 inches to the heel and sports a replaced leather grip.

The second club is stamped on the back with the following: "LADY BURKE" in an oval - the "#11", the "SCALES" cleek mark and "NIBLICK". The straight shaft is 35 inches long to the heel and sports a nice patina and original grip with a small piece missing. The face has a straight line configuration.

The third club, which has "MASHIE" stamped on the sole, measures 36.5 inches and has an original leather grip and a shaft with a slight bend. The back has the following stamps: "Approved by GOLFERS ASSN. of AMERICA" and "CRAIG WOOD - LOUISVILLE G.C. - MASHIE and P-52".

SOME HISTORY:
The Burke Company was the offshoot of another Ohio golf manufacturer. Its founder, William Burke, had managed MacGregor's club-making for nearly 15 years before branching out on his own in 1910 and converting his new company into Burke Golf Company, beginning with a full production of complete golf clubs.
Truly one of the world’s best golfers during his era, Craig Wood, was the winner of 21 PGA Tournaments including both the Masters and U.S. Open in 1941. He spent many of his most competitive seasons as a head professional in New Jersey and was a member of three Ryder Cup teams (1931, 1933, 1935). He worked at Forest Hill Field Club in Bloomfield from 1928-31 and at Hollywood Golf Club in Deal from 1932-35.

Craig Wood was the first player to lose all four major championships in extra holes. His major wins came late in his career at age 39.

Here is a fine example of a club created by a skilled craftsman! It is a circa 1910, smooth face hickory shaft golf club sporting a wonderful patina, stamped on the back "NICHOLLS SPECIAL".

Smooth face golf clubs fell out of fashion, and perhaps function, by the very early 1900s, yet they were still offered in catalogues for a number of years beyond this date.

The grip is missing except for the listing which is in good condition, and the almost-straight hickory shaft sports a nice aged patina. There is a stamp near the base of the grip noting the following: ???? A.& C.P. CO. Mfgr - Westboro, Mass. It measures 37 inches from heel to top of shaft and is likely a MASHIE NIBLICK although it is not marked as such. There are various minor dings to the metal surface and examples of wear commensurate with this club's use and 110+ years of age.

Interesting notes: This club was most likely imported from Scotland and sold by the English brothers Gilbert and Bernard Nicholls who emigrated to the US in the early 1900s. Both brothers (who were not clubmakers) had excellent professional golfing careers. Interestingly, Scotland imported thousands of wooden shafts from the US during the hickory golf club era as evidenced by the Westboro, Mass stamp on shaft.

Offered are three, desirable, circa 1910-1920 era, smooth face, hickory shaft golf clubs. Although smooth face golf clubs fell out of fashion and perhaps function by the very early 1900s, they were still offered in catalogues for a number of years beyond this date.

The first club is stamped on the back "SPALDING - GOLD MEDAL" and measures 39.5" from the heel to the top of the shaft. The Gold Medal line was first introduced in 1905 and offered till 1919. The complete grip shows mild separation and is in good condition. The shaft on this long club (likely a #2 iron) has a modest bend near the grip.

The second club, a putter, is stamped on the upper shaft "THE CRAWFORD MACGREGOR & CAMBY CO - DAYTON, OH" and measures 32.5 inches from the top of the club to the heel. The sheepskin grip is worn and the face of the club is heavy by design.

The third club is likely a MASHIE, has a straight shaft and good grip. The name of the maker is not discernible due to a partially worn stamped label. It measures almost 36 inches from the end of the club to the heel.

All three clubs show various, small, leading edge dings, original patina and mild wear commensurate with the clubs' use and 110+ years of age. A delightful trio!

Well, this was recently acquired from the estate of a 100 year old resident. The nickel plated shaver is in very nice condition, complete with a blade and box that is lined in a purple velvet type material. The interior is labeled “ANTICOR – The Saftey Corn Shaver” and the directions are printed on the label noted on the bottom of the box.

The box measures 4 inches long and is in good condition.

A must for the foot doctor in your life.

Offered is a rarely seen Patent Medicine from Maine that is in unused, as-found condition and is complete with all of its original components: its wooden mailing tube, its colorful and decorative advertising insert, and its unopened corked bottle with intact label and contents. Simply a home run when considering a Patent medicine find!

The clear glass medicine tube sports a complete, highly decorative label marked "BALM OF TULIPS", "A SURE CURE for COLD SORES", inclusive of use directions, etc, and finally followed by "Dr. ROBINSON - FOXCROFT, Me."

The highly decorative advertising insert is quite colorful and beautifully lithographed adding additional interest to this "cure" medicine. The wooden shipping container has small, difficult to read print stamped upon its side, possibly noting "ROBINSONS SAFETY POSTAL PACKET"?

The bottle measures close to 3.75 inches tall and safely resides in the 5 inch long mailing tube. Dates to the 1880-1890 time period.

Offered for sale is a neat 19th century apothecary bottle – TINCT. COLCH. SEM. - sporting a white with gold bordered painted glass label!

The 8.5 inch tall bottle has the manufacturer's letters “W.T.CO. – Pat. 1889 - USA” embossed on the base.

This label under glass (LUG) tincture bottle is in fine condition. The stopper sports ground glass construction as well. The label is complete and displays well.

This appealing bottle originated from a former pharmacy in Putnam, CT, which closed in 1949.

Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.

An interesting and scarce example of early American craftsmanship.

Offered are a scarcely-found group of three pharmacy ointment mill tube fillers that date to the circa 1910 - 1930s era. These tools-of-the-trade were typically found in compounding pharmacies. This particular grouping came from the estate of a pharmacist who first began practicing in the early 1900's.

The first example, as seen on the left, measures 3.5 inches and has a heavy brass base and an aluminum compression rod. There is a removable brass nozzle that screws into the base. This diminutive hand size mill would fill 1 to 2 ounce medication tubes and sports a nice patina. There are no markings seen and just minor superficial wear is evident.

The second mill, as seen on the right, measures 4 inches and has a one piece molded aluminum base and a brass compression rod. Perfect for filling smaller tubes, this example fits comfortably in one's hand. The condition is very good except for a small chip noted at the end of nozzle.

The third and final mill featured in the center of the primary photograph sports 3 legs and two removable brass nozzles. The nickel plating covers what appears to be brass, showing minimal wear only to the top of the feet. This unmarked 6.25 inch high beauty has all-original patina and has capacity enough to have filled either multiple or larger-sized medicine tubes.

Also included are four medicine recipe cards from the 1950's noting proprietary medicines from "BUTLERS" drug store establishment.

Offered in this grouping are ten, 19th century, antique tools, seven of which represent the woodworking trade. Collectively, as displayed in the feature photo, these wonderful vintage pieces make a stunning wall display. For the advanced craftsman, these vintage tools remain completely functional and offer one that opportunity to step back in time and create using historic implements.

1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.

Offered is a wonderful example of a late 19thC Pharmacy "tool of the trade" known as a pill machine but often referred to as a pill roller.

Pill machines were designed to enhance the productivity of the early pharmacist, and this design was, indeed, popular for many, many years. This pill machine is designed with 24 tubes for medicine-making.

The condition is very good, sporting a nice patina commensurate with its age and use. It is constructed of walnut and embellished with brass edge guards as well as brass grooved molds. The base measures approximately 11.5" L x 7" W x 1.5" H including the footed base. The paddle is 15.25"L x 2.25"W.

An apothecary classic, ready for your collection!